Pull back the Power Cable ring to disconnect the Power Cable from the Main Body Unit. Slide the Sewage Tank Detaching Button back to disconnect the tube from the Main Body Unit. While depressing both of Main Body Detaching Buttons (one on each side), lift up the Main Body Unit Connector to separate the tube from the Main Body Unit.

Remove the Water Tank and then the Water Filter that is below the Water Tank. Connect the Drain Hose to water outlet under the Water Filter. Press the Water Tank lid pin and put the other end of the Drain Hose into the Water Tank standing beside the Main Body Unit.

Select 1-015 ‘MANUAL DRAINAGE’ in cleaning settings and press [OK] button to execute for drainage. When water is drained completely, press [OK] to finish manual drainage and then press [STOP]. Clean the Water Filter thoroughly under running water and allow to completely dry.

Remove drainage hose and return Sewage Tank, Water Filter, and Water Tank back inside the Main Body. Check that the orientation of the Water Filter is correct when reinserting. Align the hole in the center of the Water Filter with the Water Filter guide of the Main Body Unit first. Push it all the way in. Close Unit Cover.

Request for Carebidet Training Support using the Form Below.